Paid plugin · Windows & macOS · 14-day trial

Camber

The console-style stereo bus compressor. Five VCA voicings, a two-stage AUTO release that breathes with the track, and the tools a bus usually needs a chain for -- dynamic EQ, transient shaping, tone and measured saturation -- in one calm window. It holds the mix together, and stays out of the way until you push it.

How the trial works

Camber -- the full plug-in window in the Dual Mono view
The real plug-in window.
About

Console grammar, measured

Camber follows the grammar of the classic console centre-section compressor: past the threshold it reaches its full ratio within a couple of dB, the ratio positions are clearly separated, and near full scale the curve opens up instead of pinning the peaks ever harder -- so hot material keeps its front edge.

It was built by measurement. A whole family of console VCA compressors was measured in detail -- static curves, timing, the two-stage AUTO release, harmonics against gain- reduction depth -- and rebuilt with original code and math. Not a sample, not a clone of one product: a model tuned to the measured behaviour of the family.

Voicings

Five units, one switch

UNIT picks one of five characters. A is the aggressive one, with the hottest harmonic response to deep compression. B is warm and broad. C is the balanced middle path. D is precise, with a deliberately hard ceiling for when you want the top pinned. E, the default, is the reference voicing: fast grab, separated ratios, open ceiling.

Camber -- OPTIONS and UNIT button bank
UNIT, RAIL and the OPTIONS block.
Saturation

Clean when clean, coloured when asked

With DRIVE and COLOUR off the compressor path is exceptionally clean -- and with nothing engaged at all, the signal passes bit-for-bit untouched. DRIVE follows a measured saturation curve, from sheen in the lower half to a real saturator at the top. COLOUR moves the harmonics from odd to even order at constant level. RAIL (16V / 24V / 60V) decides where the nonlinearity begins: earlier colour at 16V, mastering-grade headroom at 60V. The saturation stage always runs at 8x oversampling.

Camber -- the full knob grid
Every control on the panel, soft shadows included.
Beyond compression

A bus channel in one window

A three-band dynamic EQ, a PUNCH / SUSTAIN transient expander, LF / MF / HF tone with a CLEAN or FOCUS voicing, and two measured output voicings. A full sidechain section: high-pass, a four-band SC EQ, external input for the compressor, the D-EQ or both, and look-ahead. Stereo, Summed S/C, Dual Mono and Mid-Side.

Metering

A lit VU

The gain-reduction VU sits behind glass, lit by its own lamp. When you bypass Camber the lamp goes out. A live compression curve, GR history, SC EQ and D-EQ pages and IN / GR / OUT meters show what the compressor is doing.

Camber -- gain-reduction VU, lamp lit and lamp off while bypassed
Lamp lit, and dark while bypassed.
Camber -- comp curve display and IN / GR / OUT meters
Comp curve, GR history and meters.
Features

Everything on the panel

  • ✓Five UNIT voicings, A to E
  • ✓Console static law with an open top; three negative ratios for pumping effects
  • ✓AUTO and AUTO 2: two-time-constant program releases
  • ✓MIX with crossfade or parallel law, Parallel Auto Gain
  • ✓GR LIMIT: a soft ceiling on gain reduction
  • ✓DRIVE, COLOUR and RAIL 16V / 24V / 60V, always 8x oversampled
  • ✓Three-band dynamic EQ, upward or downward
  • ✓PUNCH / SUSTAIN transient expander
  • ✓LF / MF / HF tone, CLEAN or FOCUS; VOICE AIR and TAPE
  • ✓Sidechain HPF, four-band SC EQ, external input, look-ahead
  • ✓Stereo, Summed S/C, Dual Mono, Mid-Side
  • ✓Lit GR VU, comp curve, GR history, IN / GR / OUT meters
  • ✓Constant 8-sample latency; about 0.6% of one core at 48 kHz
  • ✓Ctrl / Cmd fine adjustment on every knob; 34 factory presets; UI 75-200%
Try before you buy

14 days, every feature

The button below opens the Camber Gumroad page; press Start the free 14-day trial there (price 0) for the Windows and macOS installers; then press Start Free Trial inside the plug-in: 14 days, full features, full audio quality, no watermark, no iLok and no account -- Gumroad only asks for an email address to deliver the files. The clock starts when you press Start Free Trial, not when you download. When you buy, the same installation unlocks -- nothing to reinstall.

Trial installers are version 1.0.1. File sizes and SHA-256 values are on the checksums page. Windows: the installer is not yet Authenticode-signed, so SmartScreen may appear; choose "More info", then "Run anyway". The AAX plug-in inside is PACE-signed.

We do not offer refunds on paid purchases -- the trial is how you decide. Your statutory rights are not affected. Refund policy

Free edition

Camber LE

Camber LE - the Camber engine, one fixed unit, free. Six controls, stepped dials, an external sidechain and a lit VU, on the same compressor core as Camber. No license, no iLok, no activation.

What's new

Version 1.0.1

Fixes a state-restore robustness issue, idle redraws and a fine-adjust jump. No change to the sound. A free update for everyone who already owns Camber.

  • Saved sessions and preset files are now checked more strictly before they are read. A damaged or malformed file is refused and your current settings stay as they are.
  • Limits: session or preset data larger than 1 MiB, or nested deeper than 64 levels, is refused. A preset file you edited by hand must be plain, well-formed XML (no DOCTYPE or entity declarations).
  • Valid sessions and presets load exactly as before, and the factory presets restore bit-for-bit.
  • When nothing changes, the displays, meters and buttons no longer redraw.
  • Releasing Ctrl (Windows) / Cmd (macOS) during a fine THRESHOLD drag no longer makes the value jump to the nearest coarse step.
  • The sound is unchanged: with the same settings and the same input, 1.0.1 produces the same audio as 1.0.0. The manual cover and footer now read Version 1.0.1, and its chapter on stereo tracks is corrected.
  • Install over 1.0.0. Windows and macOS installers are released together.
Specifications

Formats & requirements

DeveloperGANUE Audio
Version1.0.1
WindowsWindows 10 or later (64-bit): VST3, AAX
macOSmacOS 11.0 or later: VST3, AU, AAX (Universal -- Apple Silicon and Intel)
Sample rates44.1-192 kHz
Latency8 samples, constant (plus the chosen look-ahead)
LicenceOffline licence file, no iLok, no account, no device limit, no expiry. The AAX is PACE-signed for Pro Tools.
Trial14 days, full features
PriceUSD 49 (intro USD 29 until 2026-11-30)
Buy · v1.0.1

Get Camber

USD 49 -- intro price USD 29 until 2026-11-30. Windows & macOS.

Checkout is handled by Gumroad. Your licence file and the installer links arrive in a separate email from [email protected]; drag the file onto the Camber window and it unlocks, offline. Windows 10+ (VST3, AAX) and macOS 11+ (VST3, AU, AAX, Universal). The PDF manual is included. EULA

By continuing to checkout you agree to the EULA and the Refund Policy.